DynaNet Installer
Responsible for installation and maintenance of DynaNet. The DynaNet technician is responsible for installing and servicing the systems in the most efficient manner to ensure minimum downtime and maximum performance. All installations must meet the highest quality standards set forth by DynaFire Inc., while assuring a professional and safe working environment. The DynaNet technician will also be responsible to perform fire alarm service calls as needed.
More...Location:
Jacksonville, FL
Requirements:
- Responds to customer's service related issues promptly and must have the ability to effectively deal with customers, some that will require high levels of patience's.
- Maintain the ability to effectively communicate the needs required to complete DynaFire's scope of work to all parties responsible for portions effecting the timely completion of that scope.
- Assist the DynaFire's Sales and Estimating staff with information leading to additional sales, change order opportunities and DynaNet sales.
- Responsible for, but not limited to the mobilization, wiring, device trim, final hookup, troubleshooting, testing, and final inspection of DynaNet equipment for new job.
- To operate, test, trouble shot, program fire alarm systems and documentation required to meet all applicable industry codes and standards.
- The ability to effectively hand and computer program fire alarm panels commonly installed by DynaFire.
- Follow all DynaFire's policies and procedures.
- Interface with DynaFire Engineering department to create accurate Documentation.
- Responsible for handling warranty service calls on an as needed basis.
- Trains and instructs Crew Members and peers as needed.
- Trains and instructs the customer on the proper use of the equipment.
- Able to read and interpret wiring diagrams, schematics, blueprints and specifications.
- Responsible for operation of the following test equipment: Volt Meter, Ohm Meter, Oscilloscope, Multimeter, Tone Generator, and Battery Tester.
- Acquire and maintain required tools on tool list.
- Consistently analyze and update tools to maintain efficiency and examine and recommend the use and purchase of labor saving devices.
- Have a working knowledge of construction tools including but not limited to Step ladders, extension ladders, Scissor lifts, hand tools, power tools cordless tools, Powder actuated tools, cutting tools, Wire pulling devices and Fastening systems.
- To maintain a good driving record and be well groomed.
- Full compliance with DynaFire's and customer's safety program.
- Research and obtain information on position specific training opportunities.
- 20. Obtain a NICET level II within one year of becoming a DynaNet installer.
- 21. Regularly attend and participate in training classes or programs to increase ones knowledge and help train others.
- 22. Other duties as required or assigned by DynaFire's management.
- 23. Will have the responsibility of properly caring for and maintain a laptop computer or iPad.
- 24. Is responsible for properly updating and maintaining reports as required by management.
Training and Certification Requirements:
- The DynaNet installer shall possess a two-year electronics degree or equivalent combination of education and related field experience. A working knowledge of computers and communications systems is required. You must have a working knowledge of Microsoft Office. Employee must have a means of communicating via ISP for VPN connection. NICET level II.
Fire Sprinkler Fitter
Primarily responsible for inspection, installation, and repair Wet, Dry, Pre-action, Deluge and Foam systems. Test rebuild and or replace Backflow Preventors. Responsible for identifying trouble areas and performing service in an efficient and professional manner to ensure that sprinkler systems are operating properly.
More...Location:
Jacksonville, FL
Requirements:
- Receive, distribute, lay-out and install all material related to the fire sprinkler system installation per the engineered drawings and job specifications necessary for a complete system.
- Systems types to include wet, dry, pre-action, deluge, standpipe and hose systems. Piping to include steel schedule 40, schedule 10, schedule 7, XL, CPVC, C-900 and/or ductile iron .
- Be capable of installing and servicing underground pipe including: private service fire mains, hydrants, pits and underground control valves.
- Install all types of valves, devices and trim for system risers, alarm valves, dry pipe valves, pre-action and deluge valves including backflow prevention devices.
- Lay-out, mark and core drill penetrations for piping passing thru walls, bulkheads, floors, etc..
- Fabricate, cut, groove and/or fuse (glue) piping when necessary on the jobsite.
- Cut and thread pipe to specifications utilizing a power machine.
- Coordinate the installation with other trades avoiding obstructions.
- Be capable of utilizing the necessary tools required for the proper installation of the fire sprinkler system including hand tools, ladders, lifts, drills, saws and any tool necessary for a complete installation.
- Assemble and install piping according to NFPA and reasonable industry standards.
- Be capable of installing fire pumps, jockey pumps controllers and compressors.
- Inspect, examine and hydrostatically test fire sprinkler systems in accordance with NFPA standards
Training and Certification Requirements:
- Valid Driver's License
- 3-5 years of proven success in performance of Sprinkler inspection, installation, and service is highly preferred
- Fluent in back-flow, wet and dry systems, fire pump, alarm device terminology
- NICET I Certification or Equivalent within 24 months from date of hire
Fire Sprinkler Designer
Primary guideline for this position is to design fire sprinkler new construction, tenant finish, and renovations projects. Design, engineer, and create shop drawings for fire sprinkler projects by interpreting contract drawings, specifications, construction hand-off documents from sales, Florida Fire Prevention Codes/Statutes, and any project meetings.
More...Location:
Jacksonville, FL
Requirements:
- Maintain customer records, using automated systems.
- Select the correct products or assist customers in making product selections, based on customers' needs, product specifications, and applicable codes.
- Secure and deliver to operations project schedules, engineered drawings, and sales hand-off documents. Hold meetings with operations when projects are complicated in design or expectations.
- Answer customer's questions about products, designs, and availability of shop drawings and submittals.
- Write RFI's as needed or as requested by operations.
- Attend project meetings when necessary to support operations.
- Work with customers in providing design assistance if necessary.
- Talking to others to convey information effectively.
- Understanding the implications of new information for both current and future problem-solving and decision-making.
- Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions.
- Developing constructive and cooperative working relationships with others, and maintaining them over time.
- Communicating with people outside the organization, representing the organization to customers, the public, government, and other external sources.
- Create project folders for all contracted jobs to include a project site book for the project managers.
- Create submittal packages of designed systems utilizing manufacturer's data sheets.
- Acquire CAD files in electronic form if applicable from the appropriate source, e.g., architect, engineer.
- Create design and/or shop drawings for project to include list of material needed for purchasing department.
- Order appropriate quantity of reproduced drawings from reprograhics company when needed.
- Provide technical support to field personnel and customers.
- Provide training to other CAD operators slated for development as a Designer.
- Perform field surveys as needed for hydraulic calculations.
- Design fire protection sprinkler systems within allocated hours for each job.
- Review work order and procedural manuals to determine critical dimensions of design.
- Calculate figures to convert design dimensions to resizing dimensions specified for subsequent production.
- Design fire protection sprinkler systems with accuracy and detail to enable field installation with few design errors.
- Provide material list for fabrication.
Training and Certification Requirements:
- Minimum of 5 years hands on experience in Fire Sprinkler construction and design.
- Fluent with Fire pump controllers, Back-Flows, Dry Systems, Wet Systems, Alarm devices, and produce trouble shooting ability.
- Have the ability to multi-task and interact well with customers and support staff.
- Posses proficient office and time management skills while under pressure.
- Proficient in AutoCad and HydraCAD software to ensure efficient and accurate production of shop drawings and as-builts, along with Word, Excel, and Adobe Acrobat.
- Strong working knowledge of NFPA 13, NFPA 20, NFPA 14, UFC 3-600-01 and ETL 02-15.
Fire Alarm Inspector
Responsible for performing test & inspection on fire alarm systems. But not limited to, the installation of DynaNet, troubleshooting and maintenance of fire alarm systems. The Alarm technician is responsible for test & inspecting fire alarm systems in the most efficient manner to assure minimum down time and maximum performance. All inspections must meet the highest quality standards set forth by DynaFire, Inc., while assuring a professional and safe working environment.
More...Location:
Jacksonville, FL
Requirements:
1. Responds to customer's service related issues promptly and must have the ability to effectively deal with customers, some that will require high levels of patience's.
2. Maintain the ability to effectively communicate the needs required to complete DynaFire's scope of work to all parties responsible for portions effecting the timely completion of that scope.
3. Assist the DynaFire's Sales and Estimating staff with information leading to additional sales, change order opportunities and DynaNet sales.
4. Responsible for, but not limited to the mobilization, wiring, device trim, final hookup, troubleshooting, testing, and final inspection of fire alarm equipment for new jobs.
5. To test, trouble shot, program fire alarm systems and documentation required to meet all applicable industry codes and standards.
6. The ability to effectively hand and computer program fire alarm panels commonly installed by DynaFire.
7. Follow all DynaFire's policies and procedures.
8. Interface with DynaFire Engineering department to create accurate Documentation.
9. Responsible for handling warranty service calls on an as needed basis.
10. Trains and instructs Crew Members and peers as needed.
11. Trains and instructs the customer on the proper use of the equipment.
12. Responsible for reading and interpreting wiring diagrams, schematics, blueprints and specifications.
13. Responsible for operation of the following test equipment: Volt Meter, Ohm Meter, Oscilloscope, Multimeter, Tone Generator, and Battery Tester.
14. Acquire and maintain required tools on tool list.
15. Consistently analyze and update tools to maintain efficiency and examine and recommend the use and purchase of labor saving devices.
16. Have a working knowledge of construction tools including but not limited to Step ladders, extension ladders, Scissor lifts, hand tools, power tools cordless tools, Powder actuated tools, cutting tools, Wire pulling devices and Fastening systems.
17. To maintain a good driving record and be well groomed.
18. Full compliance with DynaFire's and customer's safety program.
19. Research and obtain information on position specific training opportunities.
20. Obtain a NICET level II within one year of becoming a Fire Alarm Test & Inspector.
21. Regularly attend and participate in training classes or programs to increase ones knowledge and help train others.
22. Other duties as required or assigned by DynaFire's management.
23. Will have the responsibility of properly caring for and maintain an IPad
24. Is responsible for properly updating and maintaining reports as required by management.
Training and Certification Requirements:
The Fire Alarm Systems Technician shall possess a two-year electronics degree or equivalent combination of education and related field experience. A working knowledge of computers and communications systems is required. You must have a working knowledge of Microsoft Office. Employee must have a means of communicating via ISP for VPN connection. NICET level II.
Fire Alarm Service Technician
Responsible for performing service calls including, but not limited to, the installation of DynaNet, troubleshooting and maintenance of fire alarm systems. The Alarm Service Technician is responsible for installing and servicing the systems in the most efficient and effective manner to assure minimum down time and maximum performance. All installations must meet the highest quality standards set forth by DynaFire, Inc., while assuring a professional and safe working environment.
More...Location:
Jacksonville, FL
Requirements:
1. Responds to customer's service related issues promptly and must have the ability to effectively deal with customers, some that will require high levels of patience's.
2. Maintain the ability to effectively communicate the needs required to complete DynaFire's scope of work to all parties responsible for portions effecting the timely completion of that scope.
3. Assist the DynaFire's Sales and Estimating staff with information leading to additional sales, change order opportunities and DynaNet sales.
4. Responsible for, but not limited to the mobilization, wiring, device trim, final hookup, troubleshooting, testing, and final inspection of fire alarm equipment for new jobs.
5. To operate, test, trouble shot, program fire alarm systems and documentation required to meet all applicable industry codes and standards.
6. The ability to effectively hand and computer program fire alarm panels commonly installed by DynaFire.
7. Follow all DynaFire's policies and procedures.
8. Interface with DynaFire Engineering department to create accurate Documentation.
9. Responsible for handling warranty service calls on an as needed basis.
10. Trains and instructs Crew Members and peers as needed.
11. Trains and instructs the customer on the proper use of the equipment.
12. Responsible for reading and interpreting wiring diagrams, schematics, blueprints and specifications.
13. Responsible for operation of the following test equipment: Volt Meter, Ohm Meter, Oscilloscope, Multimeter, Tone Generator, and Battery Tester.
14. Acquire and maintain required tools on tool list.
15. Consistently analyze and update tools to maintain efficiency and examine and recommend the use and purchase of labor saving devices.
16. Have a working knowledge of construction tools including but not limited to Step ladders, extension ladders, Scissor lifts, hand tools, power tools cordless tools, Powder actuated tools, cutting tools, Wire pulling devices and Fastening systems.
17. To maintain a good driving record and be well groomed.
18. Full compliance with DynaFire's and customer's safety program.
19. Research and obtain information on position specific training opportunities.
20. Obtain a NICET level II within one year of becoming a Fire Alarm Systems Technician.
21. Regularly attend and participate in training classes or programs to increase ones knowledge and help train others.
22. Other duties as required or assigned by DynaFire's management.
23. Will have the responsibility of properly caring for and maintain a laptop computer.
24. Is responsible for properly updating and maintaining reports as required by management.
Training and Certification Requirements:
The Fire Alarm Systems Technician shall possess a two-year electronics degree or equivalent combination of education and related field experience. A working knowledge of computers and communications systems is required. You must have a working knowledge of Microsoft Office. Employee must have a means of communicating via ISP for VPN connection. NICET level II.